AirLive WH-5400CPE-ESD - Manual (Page 22)

22
multiple access points on the same network. The device name needs to be
less than 32 characters. After verify the name you input and click “Apply”
to save the setting.
z Country/Region – Here you can set the AP to follow different country
and region regulation. The AP can support. Please select your country
region correctly.
z Operation Mode - The default operation mode is Access Point, this
connects your wireless PCs and devices to a wired network. In most cases,
no change is necessary. You can switch operation mode to Wireless Client
or Repeater mode depends on your application. Wireless Client mode can
allow AP act as a client within its range. Your Ethernet devices behind the
AP can connect to remote AP. Repeater is able to talk with one remote
access point within its range and retransmit its signal. Choose repeater
mode if you want to extend the range of your original AP. (
Note: due to
built-in internal directional patch antenna, repeater mode does not apply. )
Administration –
In the administration page, you can modify “Administrator Name” and
“Password”. Changing the sign-on user name and password is as easy as
typing the string you wish in the column. Then, type the password into second
column to confirm. Click “Apply” to finish the procedure. Be sure you noted
the modification before apply all changes.