AirLive WH-5410G - Manual (Page 24)

24
Wireless Network -
At Wireless Network page can set “SSID” / “Wireless Mode” and “Channel”.
AP supports not only standard 11b/g but also 108M SuperG. (Note: 108 M
SuperG only works with Atheros
P
®
P
based 11a/g solution)
z
Wireless Network Name (SSID) - The SSID is the unique name shared
among all points in a wireless network. The SSID must be identical for all
points in the wireless network. It is case-sensitive and must not exceed 32
alphanumeric characters, which may be any keyboard character. Make
sure this setting is the same for all points in your wireless network. For
added security, you should change the SSID from the default name
Generic, to a unique name.
z Suppressed SSID – This option can hide the SSID not available from site
survey tool. Enable this function only if you do not want the Access Point to
be found by others.
z Wireless Mode – Default setting is “2.4GHz 54Mbps (802.11g)”. This
will support all 802.11b/g clients connect to the AP. You can choose
“2.4GHz 11Mbps (802.11b)” in wireless mode column if your
environment only have 802.11b clients. The final selection “2.4GHz
108Mbps (802.11 SuperG)” supports high speed 108Mbps SuperG
function. In order to support SuperG 108M transmission, all wireless clients
will need to be Atheros
P
®
P
solution.
z Channel / Frequency – Select the appropriate channel from the list