Wireless configuration – wireless client mode – AirLive WH-5410G User Manual
Page 37
Advertising
![background image](/manuals/553974/37/background.png)
37
Wireless Configuration – Wireless Client Mode
AP can also work as an Ethernet client bridge to connect up to 16 Ethernet
device into wireless network. In order to setup the AP to work in Ethernet
bridge mode, you need to choose “Wireless Client” mode and click “Apply”
at System Properties page. After need to reboot the AP to make sure the AP
work in client mode.
After the system reboot is done, you can see the page as below. Status page
show the AP is now working in Wireless Client mode.
Advertising
This manual is related to the following products: