AirLive WL-1100SD - Manual (Page 4)

2
Peer-to-Peer (Ad-hoc) Workgroup
The Peer-to-Peer workgroup configuration enables you to
quickly set up a small wireless workgroup, where the
workgroup participants can exchange files using features
like “Files and Printer Sharing” as supported by Microsoft
®
Networking.
You can use this option to setup a temporary or Ad-hoc
network in environments where no access points are
available (for example in Small Office/Home Office
“SOHO” environments). As long as the stations are within
range of one another, this is the easiest and least expensive
way to set up a wireless network.
Home Networking
With SD WLAN Card, wireless access to the Internet or other
devices is at your fingertips. All you need to do is connect the
SD WLAN Card to an existing access point that may be
connected to the external Cable or xDSL modems and you are
ready to:
ƒ
Share files and printers, and
ƒ
Access the Internet.
2-2-3 Enterprise Networking
With the Wi-Fi certified Access Point in the corporate network
system, you can connect to a corporate Local Area Network (LAN) infrastructure to access all network
facilities in wireless. LAN Infrastructures may either be:
ƒ
Stand-alone wireless LANs.
ƒ
Wireless network infrastructures connected to an existing Ethernet network.
About the SD WLAN Card CD-ROM
The SD WLAN Card CD-ROM contains both software and documentation for the SD WLAN Card card.
INSTALLING THE DRIVER
Installation of the SD WLAN Card Driver to the Pocket PC using
Microsoft Active Sync
®
1. Connect your PDA to your computer and make sure Active-Sync® has established for a connection
between the two devices.
2. Insert the CD ROM to your PC. The following screen will apeear, click Install Driver to start driver
installation. After driver installation is complete, clik Install Utility to start utility installation.
Note: Do not insert the SD WLAN Card into the card slot of your PDA until the Driver (Step 1)
and Utility (Step 2) installations have been performed.