AirLive WL-1100SD - Manual (Page 6)

4
successfully:
1. Soft reset the PDA (push Soft-reset Button of PDA)
* Some PDA may not require resetting but it should be safer to reset.
2. Insert the SD WLAN Card into the PDA
3. Check the LED on the SD WLAN Card. If steady Blue light is seen, the SD WLAN Card is active.
4. (Optional) To check the quality of the network connection, you should use the SD WLAN Card
configuration utility program as described in the next section
SD WLAN CARD CONFIGURATION UTILITY
1. Click Install Utility to perform utility installation.
2. Click “YES” to proceed the installation.
Step 2