2 wired ethernet connection – AirLive WMU-6000FS User Manual
Page 17
Advertising
2.2.2 Wired Ethernet Connection
AirLive WMU-6000FS will detect automatically if the DHCP server is existed,
it will get a IP address form DHCP server. If there is no DHCP server, AirLive
WMU-6000FS will assign a random IP to client and you can get some
information as below shown.
Use one Ethernet cable to connect the AP Storage and your computer directly.
Then go to the command mode and key “ipconfig”. If the IP address and
subnet is 0.0.0.0, please type “ipconfig /renew” to retrieve a IP address:
AirLive WMU-6000FS User’s Manual
17
Advertising