AirLive WN-300ARM-VPN - Manual (Page 18)

AirLive WN-300ARM-VPN User’s Manual 16
4. When prompted for the User name and Password, enter values as follows:
 User name
admin
 Password
airlive
Notes:
If you can't connect:
If the WN-300ARM-VPN does not respond, check the following:
 The WN-300ARM-VPN is properly installed, LAN connection is OK, and it is powered ON. You can test
the connection by using the "Ping" command:
 Open the MS-DOS window or command prompt window.
 Enter the command:
ping 192.168.0.1
If no response is received, either the connection is not working, or your PC's IP address is not
compatible with the WN-300ARM-VPN's IP Address. (See next item.)
 If your PC is using a fixed IP Address, its IP Address must be within the range 192.168.0.2 to
192.168.0.254 to be compatible with the WN-300ARM-VPN's default IP Address of 192.168.0.1. Also, the
Network Mask must be set to 255.255.255.0.
 Ensure that your PC and the WN-300ARM-VPN are on the same network segment. (If you don't have a
router, this must be the case.)
Ensure you are using the wired LAN interface. The Wireless interface can only be used if its configuration
matches your PC's wireless settings.