AirLive WN-300ARM-VPN - Manual (Page 84)

Figure: VPN-Auto Policy Screen
-2- Data - VPN-Auto Policy Screen
General
Policy Name
Enter a unique name to identify this policy. This name is not supplied to the
remote VPN endpoint. It is used only to help you manage the policies.
Remote VPN
Endpoint
Select the desired option (Fixed IP address or Fully Qualified Domain
Name) and enter the address of the remote VPN endpoint you wish to
connect to.
Note: The remote VPN endpoint must have this VPN Gateway's address
entered as its "Remote VPN Endpoint".
NetBIOS Enable Check this if you wish NETBIOS traffic to be forwarded over the VPN
tunnel. The NETBIOS protocol is used by Microsoft Networking.
AirLive WN-300ARM-VPN User’s Manual 82