Step 38, Step 39, Step 40 – Aladdin Light Lift ALL700RM-CM User Manual
Page 18
STEP 38
Tighten fixture coupler set screws using supplied 3/32” Allen wrench. Fixture coupler set screws have
thread lock already applied at factory. See Diagram S.
STEP 39
Apply supplied liquid thread lock to all fittings including fixture coupler and screw collar loop fittings. See
Diagram S.
Never attach the chandelier to the ALL700RM improperly. Failure to secure the fixture coupler set
screws and properly apply thread lock could cause the chandelier to fall, which could cause death,
personal injury, and/or property damage.
STEP 40
Replace canopy and screw collar ring. Confirm adjustment of canopy and telescopic conduit assembly
allows contact plates to meet before the canopy touches the ceiling. See Diagram S.
Never allow the chandelier canopy to make contact with the ceiling before the contact plates meet. This
could interfere with the automatic shutoff system and could cause the chandelier to fall, which could
cause death, personal injury, and/or property damage.
Bottom Screw Collar Ring
Canopy
Tighten Set
Screws with
3/32” Allen
Wrench
Diagram S
Bottom Contact
Plate Must Meet
Top Contact Plate
Before Canopy
Touches Ceiling