Allen&Heath Xone 3D - Manual (Page 6)

Allen & Heath 6 XONE:3D User Guide
SPECIFICATIONS
Dimensions and Weights
The console is fitted with rubber feet for desktop operation. A screw on rack ear kit is
included for 19” rack or plinth mounting.
Width Height Depth Weight
Desktop 432 mm (17”) 88 mm (3.5”) 358 mm (14”) 5kg (11 lbs)
Rack ears fitted 483 mm (19”) 88 mm (3.5”) 358 mm (14”)
Packed
575 mm (22.6”) 195 mm (7.7”) 490 mm (15.7”) 6 kg (13.2 lbs)
Rack ears allow permanent fixing in a plinth or rack system. They can be fitted two ways; either
with the flange flush with the top panel or flush with the underside of the chassis. The rack ears
are fixed in place using the 6x M4 screws provided. Ensure that air vents are not obstructed.
432
483 with rack ears fitted
465 rack ear fixings
88
358
76.2
10
1.
6
37
.3
101
.6
4
1
.3
M6
Operating levels
Main outputs +4dBu XLR
Monitor 0dBu RCA
FX sends -2dBu RCA
Maximum output level +26dBu
Mic Sensitivity -45 to -15dBu
RIAA input sensitivity 7-100mV 47K/330pF
Frequency response Line in to Mix out 20 Hz to 30KHz +0/-2dB
Distortion at 1kHz Line in at +0Vu out <0.02%
Main Mix noise 22Hz— 22KHz unweighted <-80dBu (84dB S/N)
Residual Mix noise22Hz— 22KHz unweighted <-97dBu
Equalization 3-band +6dB/off (kill), 120Hz, 1.2kHz, 10kHz
Fader Shutoff <-90dB