B&K 220M - Manual (Page 6)

Page 4 13005 rev 0004
Rear Panel View
1. AC fuse holder 5. RCA input (unbalanced)
2. AC Input receptacle 6. Level controls**
3. Speaker outputs 7. Amplifier control muting input/output
4. Balanced Inputs
** OPTIONS AVAILABLE FOR THE Reference 220M AMPLIFIER
Rear panel description
1. AC fuse holder - Holds the AC Line fuse. This fuse is an 12 Amp / 250 Volt
Slow Blow fuse. Replace with same type and value fuse
only.
2. AC Input receptacle - For attaching the supplied AC power cord to the
amplifier.
3. Speaker outputs - For connecting the speakers to the amplifier. Explained
further on page 7.
4. Balanced inputs - For connecting Balanced signal patch cables (XLR).
Explained further on page 8.