Allen&Heath ML5000 SERVICE MANUAL - Manual (Page 30)

ML5000 Service Manual 29
Base removal and Internal PCB assemblies
Before beginning any service work, remove all power to the unit and disconnect any signal cables
where necessary. Ensure adequate lighting and use the correct tools.
Before you can access the internal PCB assemblies, invert the console and remove the screws
securing the base in place. Carefully lift the base off.
Note that the Earth Strip has been removed for clarity.
MONO INPUT
CONNECTOR
PCBs
MONO INPUT
PCBs
AUX, GROUP
& LRC PCBs
MASTER
DISTRIBUTION
PCB
STEREO PCBs
MIDI POWER
PCB
SYS-LINK II
OUT PCB
MONO INPUT
PCBS
EARTH BUSS PCBS
EARTH BUSS PCBS