Allen&Heath GL4000 SERVICE MANUAL - Manual (Page 39)

ALLEN & HEATH GL4000 SYS-LINK OPTION 5
FITTING THE SYS-LINK HARNESS ASSEMBLY :
Refering to fig. 4, use a pair of long nosed pliers to fit the connectors onto GROUPS 1 - 8 and the LEFT
RIGHT and MONO circuit board assemblies in the following order:
GROUP 1 to GROUP 8, then LEFT, RIGHT and then finally the MONO circuit board assembly.
SYS-LINK WIRING HARNESS
SYS-LINK ribbon harnesses
removed for clarity.
SYS-LINK CIRCUIT
BOARD ASSEMBLY
8x GROUP CIRCUIT BOARD ASSEMBLY
LEFT CIRCUIT BOARD ASSEMBLY
MONO CIRCUIT BOARD ASSEMBLY
RIGHT CIRCUIT BOARD ASSEMBLY
fig. 4
SYS-LINK harness circuit board interconnections
1 2