Allen&Heath GL4000 USER GUIDE User Manual
Page 28
27
T
HE
M
UTE
S
WITCH
Press MUTE once to mute the channel signal.
The red LED will turn on.
The audio signal will turn off (channel muted).
Mute affects the post-fade signal and will also affect
the pre-fade signal if the internal option links are
configured to do so (factory default setting).
Press MUTE again to turn the mute off.
T
URN
A
LL
C
ONSOLE
M
UTES
O
FF
OR
O
N
It is often useful to turn off (clear) all the console mutes or to turn
them on (set). You may wish to clear the console before starting
a new scene or setting up a new group or patch. Alternatively you
could set all mutes on and work with just the active channels. Once
cleared or set in this way you can overwrite and edit selected
groups and patches, or all 128 patches using the 'ALL' function as
a starting point for a new show.
T
URN
A
LL
C
ONSOLE
M
UTES
O
FF
Press SHIFT + RECALL
The red LED will start flashing.
The display flashes
CLr
Press any other key to cancel or
Press RECALL to confirm.
The LED will turn off.
All console mutes will turn off.
T
URN
A
LL
C
ONSOLE
M
UTES
O
N
Press SHIFT + RECALL
The red LED will start flashing.
The display flashes
CLr
Press SHIFT + RECALL again.
The display flashes
SEt
Press any other key to cancel or
Press RECALL to confirm.
The LED will turn off.
All console mutes will turn on.