Allen&Heath GL4000 USER GUIDE - Manual (Page 40)

39
S
ELECT THE
C
ONSOLE
MIDI C
HANNEL
Press and hold SHIFT + PREVIEW PATCH together to
enter 'MIDI mode'.
The display MIDI dot turns on and the current MIDI
channel number is shown.
While holding SHIFT + PREVIEW scroll through the MIDI
channel numbers using
∧∧∧∧∧
or
∨∨∨∨∨
Leave the display set to the required MIDI channel
number
. 1 to .16
Release SHIFT + PREVIEW to exit.
D
ISABLE THE
C
ONSOLE
MIDI S
YSTEM
Enter 'MIDI mode' as above.
While holding SHIFT + PREVIEW scroll through the MIDI
channel numbers using
∧∧∧∧∧
or
∨∨∨∨∨
Leave the display set to OFF
Release SHIFT + PREVIEW to exit.