Allen&Heath ICE-16 - Manual (Page 14)

Allen & Heath 14 ICE-16 User Guide
Channel Monitoring and Metering
A switch per channel sends either the input or the output (depending
on the IN/OUT switch) for that channel to the headphones monitor
circuit, Multiple channels can be selected at once to create a mix of
channels.
The green signal LED illuminates when a signal level is present above
–22dBu (-42dBFS).
The red Peak warning LED illuminates when the signal level exceeds
+14dBu (6dB before clipping).
The LEDs show signal either at the inputs or outputs depending on the
IN/OUT switch.
ICE-16 FRONT PANEL FEATURES
IN/OUT Switch
Allows you to choose the source for the headphones and the meter
LEDs—either from the inputs or the outputs.
USB Memory port.
Standard A type USB connector . Plug in your USB memory device
here.
Recorder Controls and Display
The user interface for recording direct to USB memory.
Monitor Headphones
For checking individual or multiple inputs or outputs. Each signal is
mono and therefore feeds both left and right ears. Both 1/4” and 3.5mm
sockets are provided.
Illuminated Display
Purely to make the ICE look nice! And to indicate that the power is
switched on.
9 1 10 2 11 3 12 4 13 5 14 6 15 7 16 8
DEL PREV NEXT PLAY/STOP REC
Record
TIME
USB DRIVE
Hi Level
Signal
MONITOR SEL IN/OUT MONITOR
PHONES/MONITOR
MONITOR LEVEL
OUT
ALLEN&HEATH