Ice-16 rear panel features, Allen & heath 15 ice-16 user guide – Allen&Heath ICE-16 User Manual
Page 15
Allen & Heath 15
ICE-16 User Guide
Mains Power Supply, Switch and Fuse
Standard IEC mains power inlet. The ICE-16 accepts mains voltages
from 90V to 265V at either 50Hz or 60Hz.
The On/Off switch powers the unit on or off.
The mains fuse is housed in the 20mm fuse holder
ICE-16 REAR PANEL FEATURES
Sync IN/OUT Connectors
This feature will be available via a firmware release early 2013.
8 pin mini DIN connectors. Use a 8 way mini DIN cable to connect the
OUT of one ICE-16 unit to the IN of another. This allows two or more
ICE-16s to be synchronised together when recording multiple tracks to
more than one USB memory device.
IEEE1394 FireWire Ports
Standard 6 pin IEEE1394 device ports. You can connect either of these
to a host computer with FireWire in order to stream 16 channels of
digital audio to and from the ICE-16. Two ICE-16s can be daisy-chained
together to double the number of channels on the FireWire bus to 32..
USB 2.0 Device Port
Type B USB device port. An alternative connection to FireWire for
streaming 16 channels of digital audio to and from a computer.
Outputs
RCA Phono connectors for analogue outputs 1 to 16. Nominal level
0dBu (775mV rms) Unbalanced.
Inputs
Standard 1/4” TRS jack sockets for analogue inputs 1 to 16. Nominal
level 0dBu (775mV rms). Unbalanced.
AC MAINS IN ~
100 - 240V~ 47-63Hz 20W MAX
OFF
ON
20mm
T1.0AL 250V
FUSE
9
1
FireWire
OUTPUTS
INPUTS
10
2
11
3
12
4
13
5
14
6
15
7
16
8
9
1
10
2
11
3
12
4
13
5
14
6
15
7
16
8
USB
SYNC
IN
OUT
B
A
See underside for safety warnings.