Allen&Heath XONE DB2 - Manual (Page 28)

Allen & Heath XONE:DB2 User Guide 28
AP8640_2
PC DRIVER INSTALLATION
STOP!
BEFORE YOU CONNECT YOUR XONE:DB2 TO A COMPUTER PLEASE FOLLOW
THESE INSTRUCTIONS ON INSTALLING THE CORRECT DRIVERS FOR THE USB
SOUNDCARD.
CHECK www.XONE.co.uk/db2 FOR NEWS ON THE LATEST DRIVER VERSIONS
Software Installation (Windows XP, Vista and Windows 7)
Follow the procedure described below to install the USB audio and MIDI drivers:
1— Connect the XONE:DB2 to your mains electricity supply and switch on.
Do not connect the DB2 to the PC at this time.
2— Open the Drivers folder and run Setup.exe.
3— Select your preferred language
4— Select Install the driver
5— When prompted, connect the DB2 to
the PC with the USB lead.