AMMCO SM6000 PORTABLE MID-RISE LIFT - Manual (Page 7)

Model SM6000
Installation, Operation, and Maintenance
File: MR6-IOM-E.doc 7 Rev: 12/12/08
1. Be sure lift is fully lowered and service bay is
clear of all personnel before the vehicle is
driven on to lift.
2. Position vehicle over lift having equal distance
from front tire to end of front ramps and rear
tire to end of rear ramps. Vehicle must also be
centered side to side.
WARNING Lift is designed to raise complete
vehicle. NEVER use to raise just one end or
Side of vehicle.
NOTE:
Some vehicles may have the manufacturer’s
recommended lift points identified by triangle
shape marks located on its undercarriage. Also,
there may be a label located on the right front door
lock face showing specific vehicle lift points.
If the vehicles lift points are not identified,
refer to the service garage lift points shown in Fig.
1. ALWAYS follow the operating instructions
supplied with the lift.
Ladder
Unitized
Perimeter
Stub
Fig 1 Service Garage Lift Points