Smoothie professional, Control buttons, Operation – West Bend Back to Basics Smoothie Professional User Manual

Page 8

Advertising
background image

8

OPERATION

PULSE gives short bursts of power at high
speed. Use PULSE to begin the mixing of ice
and other hard ingredients.

LOW/DISPENSE runs the unit at low speed.
This speed should be used for the initial 30
seconds of mixing as well as for dispensing.

HIGH runs the unit at high speed. This speed
should be used for the final stages of mixing.
Do not use this speed for dispensing.

OFF turns off the machine.

Smoothie Professional

Control Buttons

The Smoothie Professional

mixing container is conveniently marked to create

perfect smoothies. To make your favorite frozen drinks, follow these simple steps:

ADD LIQUIDS

Add any combination of liquid ingredients up to the LIQUIDS mark under SERVES
2 or SERVES 4. Liquids include any soft ingredients such as fruit, milk, fruit juice,
herbal supplements or yogurt in any combination you think would be tasty.
We are, of course, partial to the Back to Basics

®

smoothie mixes, which quickly

and easily make three delicious 8-ounce smoothies.

ADD ICE

Add ice or frozen ingredients until the total level reaches the FROZEN
INGREDIENTS line on the side of the mixing container. Frozen ingredients include
ice, frozen fruit, frozen yogurt, ice cream, etc.

SMOOTH IT

With the lid on and the stir stick set in the hole on the lid, pulse the mixture 2 or 3
times by pressing the PULSE button. Then press the button to ON and wait until
the ingredients are completely mixed. Turn the stir stick counter-clockwise for best
mixing results.

Professional Manual***.indd 8

9/26/06 3:01:30 PM

Advertising