Take down - use extreme caution removing all poles, Tension guy webs, Final side pole adjustment – Anchor CENTURY 100 WIDE, ONE-PIECE User Manual
Page 13: Important
13
Tension webs at laces that are parallel with the width of
tent fi rst and then at corners.
Next, tension guy webs at middle(s).
Work around the tent in a balanced manner so that tent is
tensioned as evenly all around as possible.
Caution - DO NOT OVER-TENSION TENT
BEYOND EAVE LINE.
Tension remaining guy webs.
At one side pole at a time, release winch tension and place
bottom of poles at previously marked eave line location.
Insert guy web into winch. Pull excess through winch.
Tension as needed using winch bar.
Do not use extenders on winch bar tool.
Take Down - Use Extreme Caution
Removing All Poles
IMPORTANT:
Check Guy Webs periodically for tightness
and good condition.
Store tent in a cool, dry area. Never store
while wet or damp.
Tension Guy Webs
With side poles standing vertical and bases at the marked side pole locations for the footprint, ratchet webs to tension
the top evenly.
Protective covers are recommended for all stakes and stake bars.
Final Side Pole Adjustment
1. Spread ground cover.
2. Release tension on all web guys.
3. Slant side poles inward - slowly and carefully.
4. Remove center and side poles.
5. Reverse installation steps.
8
9
10