APG PG5 user manual - Manual (Page 23)

Rev. A1, 3/10 PG5
23
Automation Products Group, Inc.
APG...Providing tailored solutions for measurement applications
Tel: 1/888/525-7300 • Fax: 1/435/753-7490 • www.apgsensors.com • [email protected]
Battery powered with 0-2 VDC output option:
The 0–2 VDC signal is accessed through a stereo jack connection on the back
of the gauge.
0-2 VDC Output
Tip + Output
Center – Output
Body No connection
NOTE 1: Do not connect to the stereo jack’s case connection.
NOTE 2: To minimize the effect on the battery life, the output should not be
loaded with less than 100k ohms.