APG RPM Explosion Proof Resistive Chain datasheet - Manual (Page 3)

Options
Part Number: RPM - _____ - _____ - _____ - _____ - _____ - _____ - _____
A B C D E F G
APG
Automation Products Group, Inc. www.apgsensors.com
tel. 888.525.7300 [email protected]
3
RPM Accessories
Please order separately by part number.
Part Number Description
135414
Float stop 110367 5 in. 316 SS float, 0.25 in. resolution,
0.5 SG
135396 Bottom bracket 125312 8 in. polyurethane float, 0.5 in.
resolution, 0.44 SG
125603 Right angle bracket pipe clamp 125620 8 in. polyurethane float, 0.25 in.
resolution, 0.44 SG
110368 5 in. 316 SS float, 0.5 in.
resolution, 0.5 SG
A. Probe Length
_____ Specify in inches
B. Logo Designation
□ A APG (Default)
□ B Custom (minimum quantities apply)
C. Float
□ N No Float
□ F Polyurethane float with designated logo (0.44
SG, 8” OD)
□ S 316 SS float (0.5 SG, 5” OD)
□ C Custom float (minimum quantities apply)
D. Output Signal/Hazard Rating
□ EX1 0-24 VDC (resistive) with EX approval
(Class 1, Div. 1)
□ IS 4-20 mA with IS and EX approval
(Class 1, Div. 1)
□ ISr 20-4 mA with IS and EX approval
(Class 1, Div. 1)
□ AIS 4-20 mA with ATEX approval
(Ex. ll.1G EX ia IIB T3 and Class 1, Div. 1 ia)
CSA, IS, Class 1 Division 1
E. Custom Wiring
□ 000 None
□ 001 T&B 2531 strain relief
□ 2xx Custom cable
F. Resolution/Deadband S1, S2
□ 02 1/2” resolution, top deadband (S1) = 8 inches,
bottom deadband (S2) = 5 inches
□ 03 1/2” resolution, top deadband (S1) = 8 inches,
bottom deadband (S2) = 4 inches
□ 04 1/2” resolution, top deadband (S1) = 1/2
float H, bottom deadband (S2) = 1/2 float H
□ 12 1/4” resolution, top deadband (S1) = 8 inches,
bottom deadband (S2) = 5 inches
□ 13 1/4” resolution, top deadband (S1) = 8 inches,
bottom deadband (S2) = 4 inches
□ 14 1/4” resolution, top deadband (S1) = 1/2
float H, bottom deadband (S2) = 1/2 float H
G. Mounting (Optional)
□ 00 None
□ 0Ax Flat faced ANSI flange 316L SS (Specify
size in ordering code: x=2”, 3”, 4”, 5”, or 6”)
□ 1Ax Raised face ANSI flange 316L SS (Specify
size in ordering code: x=2”, 3”, 4”, 5”, or 6”)
□ 4Tx NPT plug mounted outside of tank 316L SS
(Specify size in ordering code: x=2” or 3”)