APG PG-2000 datasheet - Manual

1
Automation Products Group, Inc.
1025 West 1700 North
Tel. 1/888/525-7300
Logan, UT 84321 USA Fax 1/435/753-7490
w w w . a p g s e n s o r s . c o m
s a l e s @ a p g s e n s o r s . c o m
PG-2000 Digital Pressure Gauge
APG
Automation Products Group, Inc.
®
PG-2000
■
Large 4 digit display with 0.5 in.
digits
■
Available ranges from 0 up to
2,000 psi
■
Rugged, chemical-resistant case
■
Display capability to 2000
■
Battery operated with convenient
on/off switch
■
±0.25% accuracy of full scale (on
selected ranges)
■
Gauge reference pressure
■
Internally complaint to CE
■
On/off button
■
1/4” NPTM process connection
Digital Pressure Gauge
Options
■
16 minute auto-off optional at no
extra cost
■
Rear pressure port
■
Zero adjust knob
■
External power
■
±0.25% accuracy with NIST
certification (on select ranges)
Accessories
■
Panel mount flange (rear pressure
port only)
■
AC to DC external power supply
■
Shock dampening rubber
boot
■
Operational Description
Battery Powered Digital Gauge
Offers High Accuracy at Low Cost
Utilizing a solid state design,
the PG-2000 incorporates a semi-
conductor strain gage pressure
transducer as the sensing element,
conditioned by state of the art
surface mount electronics. The unit
has a very low power requirement,
resulting in a battery life of two
years in typical use. The large 4
digit display and ±0.25% full scale
accuracy allows it to replace much
larger mechanical gauges.
■
Applications
No special tools or adaptors
are required for installation of the
PG-2000. This makes the unit an
easy, cost-effective replace ment for
less accurate, standard mechanical
gauges. The unit’s long life, ease
of operation, high accuracy, and
low cost make it perfect for all
applications where standard
2 1/2 in. or larger mechanical gauges
have been used.
Rev. 6.08