APG PG-5000 datasheet - Manual (Page 2)

2
Automation Products Group, Inc.
1025 West 1700 North
Tel. 1/888/525-7300
Logan, UT 84321 USA Fax 1/435/753-7490
w w w . a p g s e n s o r s . c o m
s a l e s @ a p g s e n s o r s . c o m
PG-5000 Digital Pressure Gauge
APG
Automation Products Group, Inc.
®
■
Electrical Specifications
4-20 mA Output
Input Voltage (Excitation): 7 VDC min (no load)
to 35 VDC max
Input Current: 3-30 mA max
Output: 4-20 mA ±0.16 mA at set points
Output/Input: 2 wire loop powered
Resolution: Infinite
Protection: Reversed polarity
■
Common Pressure Ranges
Range Unit of Display
Option Range Measure Resolution
30* -30 to 0 inHg 0.1
30 0 to 30 psi 0.1
60 0 to 60 psi 0.1
100 0 to 100 psi 0.1
160 0 to 160 psi 0.1
200 0 to 200 psi 0.1
250 0 to 250 psi 0.1
500 0 to 500 psi 0.1
1000 0 to 1000 psi 1
2000 0 to 2000 psi 1
5000 0 to 5000 psi 1
10000 0 to 10000 psi 1
Other ranges available.
*Requires VAC option when ordering.
0-2 VDC Output
Input Voltage (Excitation): Battery powered
Output: Zero set point is ±0.15 V with a 2 VDC
span ±0.02 VDC
Output/Input: 2 wire
Resolution: Infinite
0-5 VDC Output
Input Voltage (Excitation): 12 to 31 VDC
Input Current: 6 mA max
Output: 0-5 VDC / ±0.05 VDC at set points
Output/Input: Non-isolated 3 wire
Resolution: Infinite
Protection: Reversed polarity
■
Specifications
Performance
Standard Pressure Ranges
Compound Gauge: From vac up to 500 psi
Gauge: From 0 to 10000 psi
Absolute @ ±0.25% Linear Accuracy: From 0 to 5000 psi
Absolute @ ±0.1% Linear Accuracy: From 0 to 10000 psi
Overpressure: 2x full scale
Burst Pressure: 10x full scale or 20,000 psi (whichever is less)
Accuracy (linearity & hysteresis): ±0.25% of full scale (B.F.S.L.) or 2 digital counts, whichever
is greater; NIST traceable certification also available for ±0.25% and ±0.1% accuracy in selected
ranges
Stability – One Year Zero Drift: 15-5: < ±0.5% F.S., 316: < ±1% F.S.
Thermal Zero Shift
> 100 psi: ±0.02% F.S./°F
≤ 100 psi: ±0.04% F.S./°F
Thermal Sensitivity Shift
> 100 psi: ±0.02% F.S./°F
≤ 100 psi: ±0.04% F.S./°F
Life: 10 million cycles minimum
Environmental
Compensated Temp: 20 to 130°F (-7 to 54°C)
Storage Temp: -40 to 160°F (-40 to 71°C)
Operating Temp: 0 to 160°F (-18 to 71°C)
Electrical
Batteries: Standard 9 V (1), user replaceable (2-year life typical with auto off option)
External Power: 10-32 VDC
Display Type: 4 digit LCD, 0.5 in. digits
Display Resolution: 1 part in 9999
Low Battery Detection: Displays “LBAT” @ 4.0 VDC ±5% with V
IN
= 9.0 VDC
Adjustments: Front accessible: “Z” Zero Adjust; “S” Span Adjust
Auto-Off: 16 minutes (not available with options L1, L3 or L4)
Physical
Weight: 0.36 lb.
Construction Materials
Case: Injection molded case material EMI-X
® PDX-W-88341
Wetted Materials: 15-5 SS; 316L SS available at no extra charge (High resolution ranges under
100 psi, in 316L SS incorporate a Hastelloy
® C276 diaphragm); One piece Hastelloy ® fitting also
available (minimum quantities required)
6 Pin Connector: Electrical receptacle, R04-R6M or equivalent with optional output selections
(included with optional output selections)
6 Pin Mating Connector: R04-J6F or equivalent (Sold separately. See accessories.)
External Power Connector: 1/8 in. – 3 conductor (included with optional external power selection)
External Power Mating Connector: 1/8 in. – 3 conductor (included with optional external power
selection)
Process Cavity Volume: 0.07
3 in.
Specifications are subject to change without notice.
4-20mA Output vs. Pressure Type Table
Vacuum
20mA
30.0
N/A
N/A 4mA
0.0
Vacuum
Pressure
Pressure Type F.S. 0
Gauge / Absolute
N/A
N/A 20mA
F.S.
4mA
0.0
Compound Gauge
4mA
-30.0
20mA
F.S.
-
0.0
Output
Display*
*Display in inHg, for example only.
Note: For a pressure type of compound gauge, with 4-20 mA
output, the full scale pressure range minimum is 100 psi.