APG RCU-7000 datasheet - Manual

1
Automation Products Group, Inc.
1025 West 1700 North
Tel. 1/888/525-7300
Logan, UT 84321 USA Fax 1/435/753-7490
w w w . a p g s e n s o r s . c o m
s a l e s @ a p g s e n s o r s . c o m
RCU-7000 Power Relay Unit for Pump Control
APG
Automation Products Group, Inc.
®
Rev. 5.08
NO
NC
C
Relay
ALARM
LED
SELECT
SW.
a
b
Relay
Driver
Comparator Amp.
POWER
LED
E Com. E0 E1 E2
NO NC
b a
C
RCU-7000
Power Relay Unit for Pump Control
■
Specifications
PERFORMANCE
Output SPDT Rating: 240 VAC, 5A max.,
30 VDC, 5 A resistive
Source to Sensor: 8 VAC, 5 mA max.
Operating Resistance: 4 K
Ω or less
Release Resistance: 15 K Ω or less
Indication: Green LED for power status;
Red LED for relay status
ELECTRICAL
Supply Voltage: 90 to 132 VAC; 180 to
264 VAC, 50/60 Hz
Power Consumption: 1.5 VA
PHYSICAL
Dimensions: 2 x 3.125 x 4 in. (50 x 84 x 109
mm)
Materials: ABS
Weight: 0.61 lbs. (280 g)
ENVIRONMENTAL
Operational Temperature: 14 to 122°F
(-10 to 50°C)
Specifications are subject to change without
notice.
■
Low cost relay for switching
of larger loads and alternating
pumps
■
Programmable alarm status
■
DIN rail socket is available
■
Use with all single point level
sensors when switching loads or
control functions are required
The RCU-7000 is a control relay
for switching higher currents and
voltages than for which a reed
switch level device might be rated.
The RCU-7000 is designed so that
multiple units may be used in
combination to provide a variety of
control functions, including multiple
alarms and alternating pumps.
■
Wiring
■
Standard relay outputs
■
120 VAC or 240 VAC model
available