3 configuration and setup, 1 locating and ip configuring using device view, Configuration and setup – Atop Technology MB5416A2 User manual User Manual
Page 18: Locating and ip configuring using device view
Atop Modbus Gateway
MB54XX-X Series
User’s Manual V 1.1
15
3 Configuration and Setup
3.1 Locating and IP configuring using Device View©
First, please install our configuration utility program Device View© that comes with the
Product CD or download it from our websites
. For
more information on how to install Device View© , please refer to the manual that comes in the
utility CD. To find the Modbus Gateway device on your network, press
“Scan”, a list of devices
currently connected to the network will be shown in the window.
Fig. 3. 1
Note: for illustration purpose only, actual values/settings may vary between devices.
The device might not be in the same subnet as your PC, because of this you will have to use
our utility to locate it in your virtual environment. To configure each device, click the selected
device (default IP: 10.0.50.100), and login with the default username and password. After
successful login, click
“Configuration >Network…” (Or Ctrl+N), and a pop-up window will
appear as follows,