Atop Technology MB5416A2 User manual - Manual (Page 37)

Atop Modbus Gateway
MB54XX-X Series
User’s Manual V 1.1
34
3.6 Advanced Settings
3.6.1 SNMP Settings
SNMP Settings determines whether your device settings can be viewed with standard SNMP
software; by default it is disabled.
 SysName which is by default the MAC address
 SysLocation refers to the device’s physical location.
 SysContact is the device administrator’s contact information.
If you wish to make the information available for public viewing by a Read Community, simply
check the “Enable SNMP” box and fill in “Public_viewers” in Read Community field. If you
wish to allow a group of people called “Power_users” to change the information, enter
“Power_users” in Write Community. If you allow a trap server to collect device information,
please fill in SNMP Trap Server with its corresponding IP address (the trap server designed to
collect all alarm information). Configuration will take effect after the device is restarted.
Fig. 3. 18