Autoquip TITAN SCISSOR LIFT TABLE - Manual (Page 20)

20
5. OPERATION
5.1 Raise And Lower Lift
Prevent serious injury or death.
Before operating lift, all personnel interacting with lift must read,
understand and follow instructions and safety warnings in this manual.
Adjusting safety relief valve may result in premature motor failure.
Do not adjust safety relief valve.
Raising loads exceeding rated capacity of lift may result in excessive wear and damage to lift.
Prevent serious injury or death.
Personnel must maintain a safe operating distance of at least 36” any time
lift is operated.
1. Verify all personnel are away from lift.
2. Press “UP” button to raise lift. Release button when lift
reaches desired position.
Do not operate lift on relief for more
than a few seconds. When on relief,
valve will make a squealing sound.
3. Press "DOWN" button to lower lift. Release button
when lift reaches desired position.
^ WARNING
NOTICE
^ WARNING
NOTICE