Autoquip SPIRALIFT SCISSORS LIFT - Manual (Page 19)

19
Normally scissors lifts will require very little maintenance. However, a routine
maintenance program could prevent costly replacement of parts and/or downtime.
WARNING!
To avoid personal injury, NEVER go under the lift platform or perform any
maintenance on the lift until the load is removed and the scissors
mechanism is securely blocked in the open position. See "Lift Blocking
Instructions" section
.
MONTHLY INSPECTION
1. Lubricate the spiral mechanism (see recommendations in this section).
2. Check any unusual noise when it occurs. Determine the source and correct as
necessary.
3. Check the snap rings at all rollers, if not in place, and/or secure, replace or repair
immediately.
4. Check all rollers for signs of wear. Replace as necessary.
5. Do not grease roller or axles; they have lifetime-lubricated bearings.
6. Check all wiring for looseness or wear. Repair at once.
7. Check for metal particles or filings around the base of the spiral mechanism.
ROUTINE MAINTENANCE