Online manual not for resale purposes – BLITZ R-VIT Type 1 User Manual

Page 10

Advertising

Page 10 of 29

WARNING-All images and text in this manual is the property of

Blitz Co., Ltd. (Japan)

No part of this manual may be reproduced, stored in retrieval systems, or transmitted in any way
without prior written permission of

Blitz Co., Ltd. (Japan).

Power On (turning ON the R-VIT)

Main Menu Display

※ 1: Communication

Error Display

When powering for the first time or after resetting the R-VIT

Type I

1. Confirm the connection, turn the ignition on and start the

engine.

After the starting display, the screen will display

[MAKER] to set the vehicle’s manufacturer.

3. Press ENTER to select the vehicles’s manufacturer.

4. Scroll by pressing Up or Down to select the manufacturer.

5. Press ENTER and The R-VIT will verify the communication

with the ECU.

※ An error display will show if an error occurs

communicating with the ECU (※1). If this happens,

press any button to go back to the MAIN MENU,

restart the R-VIT and redo the above spteps again. If

problems persist, please contact the dealer you

purchased the item.

6. If the display goes back to the MAIN MENU after the

communication procedure, the setting has been a success.

Power Off (turning OFF the the R-VIT)

Since The R-VIT is in interface with the IGN; it will turn off

automatically when you turn off the IGN.

1. Depending on a vehicle, when the IGN is turned off, the

R-VIT will shift to the countdown diplay mode and power

itself off.

2. Depending on a vehicle, it is normal that the display goes

black when the R-VIT shuts itself off.

3. Depending on a vehicle, it is normal the R-VIT turns itself

ON when the automatic door lock is engaged or disengaged.

However, the R-VIT will shift to the countdown diplay

mode and power itself off.

4. Sometimes, the R-VIT wll power itself ON while pressing

on some buttons; but, the R-VIT will shift to the

Online Manual Not For Resale Purposes

Advertising

Popular Brands

Popular manuals