Online manual not for resale purposes – BLITZ R-VIT Type 1 User Manual

Page 15

Advertising

Page 15 of 29

WARNING-All images and text in this manual is the property of

Blitz Co., Ltd. (Japan)

No part of this manual may be reproduced, stored in retrieval systems, or transmitted in any way
without prior written permission of

Blitz Co., Ltd. (Japan).

5. Operation Method (It is the same as the Needle Meter Method)

Triple Monitor Display Mode.

1. To display the TRIPLE MONITOR DISPLAT MODE, select and enter [TRIPLE MONITOR] by

scrolling up or down at the MAIN MENU.

2. The TRIPLE MONITOR DISPLAT MODE is able to display three monitoring items

simultaneously.

3. There are four ways to choose on how to display the monitoring items:

a. Present value only
b. Present value and bar graph
c. Present value and peak value
d. Present value, large font.

Ex 4:

4. Monitoring item configuration method.

Press the ENTER button and it will select on the first monitoring item (Ex 4a: TACHO).

Scroll Up or Down to select the desired monitoring item, then press ENTER to confirm.

By pressing downward it will scroll from [

①Vehicle speed] to [⑱４ＷＤ %] and

backwards.

After confirming the first monitoring item, scroll Up or Down to select the desired ways to

be displayed then, press ENTER to confirm. (Ex 4:).

By pressing downward it will scroll from [a. Present value only] ～ [d. Present value,

Large font]

and backwards.

After setting the first monitoring item and its desired way to be displayed, it will go

automatically go to set up the second monitoring item.

Redo the steps (b.～f.) to set up the second item to be monitored

After setting the second monitoring item and its desired way to display, it will

automatically go to set up the third monitoring item.

Redo the steps (b.～f.) to set up the third monitoring item.

After setting the third monitoring item and its desired way to display, the TRIPLE

MONITOR DISPLAY MODE will start to monitor and display.

It will go to the prior step by pressing the left button.

[Warning] The R-VIT will go back to its prior monitoring state by keeping it for over 5 seconds without

any operation. However, the changes will take place.

Operation Method. (It is the same as the Needle Meter Method)

Online Manual Not For Resale Purposes

Advertising

Popular Brands

Popular manuals