Online manual not for resale purposes – BLITZ Toyota Yaris Compressor System User Manual

Page 23

Advertising

WARNING: All images and text in this manual is the property of Blitz Co., Ltd. (Japan).
No parts of this manual may be reproduced, stored in retrieval systems, or transmitted in any way
without prior written permission of Blitz Co., Ltd. (Japan).

O-ring

Pressure regulator

Fuel suction plate

Altering portion

26. Regulator

④

Disconnect the fuel evaporation tube No. 2.

（ a ）

Before start working, clean up the dirt

around the clip.

（b）Disconnect by pressing the Fuel tube connector clip

with your finger tips.

Warning:

・

Be extra careful not to damage or attach
any foreign substance while removing the
tube, since an O-ring is sealing the
plugging section of the nylon tube suction
plate of the quick connector.

・

Only use your hands for the disconnecting
procedure, DO NOT use any tools.

・

DO NOT rotate or bend the nylon hose with
force.

・

DO NOT attach any foreign particles to
plugging section.

・

Cover the disconnected section with a
plastic bag.

・

If the connector is seized, release it by
pulling or pushing it gently.

⑤

Remove the fuel tank vent tube set plate.

⑥

Remove the fuel suction tube assembly w/
pump.

⑦ Remove the cover.

（

a） Remove the cover by unlocking it with a

minus driver.

⑧

Remove the fuel pressure regulator.

⑨

Use a stick file to alter the portion as shown in
the figure.

⑩

Install the (C. 26) regulator at the altered
portion by adjusting the projected section of
the regulator as shown in the figure.

Warning:

・

Be extra careful not to damage the O-ring
from the altered portion.

・

Make sure to clean up the fuel suction
tube assembly w/ pump thoroughly from
foreign particles after making the
alterations.

・

It might cause engine trouble if any
f

i l

l f

Online Manual Not For Resale Purposes

Advertising

Popular Brands

Popular manuals