Online manual not for resale purposes – BLITZ Toyota Yaris Compressor System User Manual

Page 27

Advertising

WARNING: All images and text in this manual is the property of Blitz Co., Ltd. (Japan).
No parts of this manual may be reproduced, stored in retrieval systems, or transmitted in any way
without prior written permission of Blitz Co., Ltd. (Japan).

Alter this section.

ＥＦＩ

ＡＭ２

Fuse Box

⑪

Attach the 27. Clutch Switch at the upper
side of the genuine computer.

⑫

Install back the engine controller computer’s
cover.

⑬

Change the fuse AM2 (15A to 20A) from the
fuse box locate in the engine room.

⑭

Connect the ground terminal of the battery.

⑮

Remove the EFI fuse for over 15 seconds from
the engine room fuse box; then reinstall the
fuse.

39) Make alterations (Cut the area that gets into

contact with the Compressor) to the genuine
engine cover as shown in the figure.

40) Verify if the compressor’s pulley clutch goes

on and off while pressing on the gas pedal
with only the ignition ON.

※

The clutch will activate even with the
engine OFF.

41) Start the engine and let it run in idle for 5～10

minutes.

The installation of this kit is

over.

Online Manual Not For Resale Purposes

Advertising

Popular Brands

Popular manuals