Blue Sea Systems 7521 P12 Battery Charger - 12V DC 25A - Manual (Page 26)

Specifications are subject to change. See bluesea.com/P12 for current information.
P12 Battery Charger Remote
Indicates battery charger stage, alerts, and controls basic battery charger functions
LED Indicators
• Charging: Quick check for green light confirms charging
• Charge Stage: Displays charging stage including PreFloat for each battery
• Equalize: Indicates when the charger is in equalization mode
• Fan Mode: Indicates charger’s internal fan mode
• Charge Output: Displays the percentage of output current for each battery. Will also indicate maximum output setting when maximum output is adjusted
to accommodate for AC source limitations.
• Alert: Provides warning and alert status for quick diagnostics
Four Control Buttons
• Fan: User adjustable settings (OFF, LOW, or HIGH)
• Dim/ Alarm: Provides adjustment to brightness of LEDs on display as well as Silence function for alarms.
• Output: User adjustable charger output when AC source limitations exist that require lowering the AC current draw.
• Standby: Places P12 Battery Charger into standby mode
Specifications
Minimum Operating Temperature −20°C (−4°F)
Maximum Operating Temperature 60°C (140°F)
Minimum Storage Temperature −30°C (−22°F)
Maximum Storage Temperature 70°C (158°F)
Mounting Hole Cutout 1-1/4” (31.75 mm)
Dimensions Height: 3.01” (76.56 mm)
Width: 4.15” (105.46 mm)
Depth: .95” (24.01 mm)
Mounting Hardware Included #6 Screws
Electrical:
On State Operating Current <300mA sourced from charger
Communications:
Protocol Proprietary
Maximum Cable Length 150 ft (45.7 m)
Cable Cat5e (Standard US)
Regulatory
Surface Mount Gasket creates an IP67 waterproof seal on unit face--temporary immersion for 30 minutes .
Scan for
additional
product
information
P12 Battery
Charger Remote
P12 Battery Charger
RJ45 Port
The P12 Battery Charger Remote uses one Cat5e cable for communication and power.
24
Cable Connection
Optional Accessory
P12
7520 BATTERY CHARGER REMOTE