Briggs & Stratton Water Transfer Pump - Manual (Page 10)

10 BRIGGSandSTRATTON.COM
A - Fuel Tank — Fill tank with regular unleaded fuel. Always
leave room for fuel expansion.
B - Priming Plug — Fill pump with water here to prime
pump before starting.
C - Discharge Outlet — Connect discharge hose here.
D - Choke Lever — Prepares a cold engine for starting.
E - Air Cleaner — Protects engine by filtering dust and
debris out of intake air.
F - Recoil Starter — Used for starting the engine manually.
G - Engine Speed Lever — Used to adjust engine speed to
control pump output.
H - On/Off Switch — Set this switch to “On” before using
recoil starter. Set switch to “Off” to stop a running
engine.
J - Oil Drain — Drain engine oil here.
K - Oil Fill — Check and add engine oil here.
L - Data Tag — Provides model and serial number of water
transfer pump. Please have these readily available if
calling for assistance.
M - Suction Inlet — Connect reinforced suction hose here.
N - Water Drain Plug — Remove to drain water from pump
and flush internal components with clean water.
P - Pump Chamber — Be sure to fill with water before
starting.
R - Engine Information — Stamped on valve cover. Provides
model, type and code number of engine. Please have
these readily available when calling for assistance.
S - Fuel Shutoff Valve — Used to turn fuel supply on and
off to engine.
Item Not Shown:
Strainer Basket — Used to limit passage of abrasive
materials into the pump.
10 BRIGGSandSTRATTON.COM
G
E
J
F
K
D
Unit may vary slightly from that shown
Features and Controls
Read this Operator’s Manual and safety rules before operating your water transfer pump.
Compare the illustrations with your water transfer pump, to familiarize yourself with the locations of various controls
and adjustments. Save this manual for future reference.
H L M N P S
C B A
R