Bissell ZING 10M2 - Manual (Page 9)

w w w . b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1
9
M
aintenance and care
Cleaning the dirt cup filters
Use only BISSELL replacement
filters in your Zing Compact.
1. Unplug the vacuum from the
electrical outlet.
2. The dirt cup filters can be reached
by removing the dirt cup from the
vacuum, grasping the handle on the
bottom of the dirt cup filter assembly
and turning counter clockwise to
unlock. Pull straight down to remove.
3. Remove the dirt cup filter screen
by grasping the bottom of the filter
frame base and pulling straight up.
4. Remove the dirt cup filter by
grasping the bottom of the filter
frame base and turning the dirt cup
filter counter clockwise and pulling
straight up.
5. The dirt cup filter screen and dirt
cup filter can be hand washed in
cold water with a mild detergent.
Rinse well and air dry completely
before placing back onto the filter
frame base.
6. Attach the dirt cup filter back onto
the filter frame base by lining up
the tabs on the filter base with the
notches on the dirt cup filter and
turning clockwise to lock back into
place.
7. Attach the dirt cup filter screen back
on to the dirt cup filter by sliding it
down over the dirt cup filter, making
sure that the tabs on the bottom of
the dirt cup filter screen line up with
the notches on the dirt cup filter.
8. Insert the dirt cup filter assembly
back into the dirt cup by lining up
the tabs on the top of the dirt cup
filter assembly with the notches
inside the top of the dirt cup and
turning the handle on the bottom of
the dirt cup filter assembly clockwise
to lock into place.
2.
3.
4.