CalDigit RAID Card User Manual
Page 22
22
A. MacPro
1(b)
If you are using the first internal hard drive as
the system drive (including the use of Boot Camp),
and the other three drives for the RAID volume
1.1
Install the CalDigit Driver v1.8.0
(a)
Go to
http://www.CalDigit.com/Support/HDPro-HDOne-
RAIDCard-1.8.0.zip
(b)
Select CalDigit/Mac Installer/1.8.x/HDPro_IP_MAC_1.8.x.mpkg
(c)
Welcome to CalDigit installation program, please click continue
(d)
Select your desired destinatino and click continue
(e)
Enter your Administrator password and click OK
(f)
After finishing the installation click Restart
Note:
If you are using Mac Pro and have 10.5.3 installed. Please
refer to
http://support.apple.com/kb/HT1237
and make sure your
Mac Pro’s EFI is 1.3 or above.
If your dont have the latest EFI version, please download it at
http://www.apple.com/downloads/macosx/apple/firmware_
hardware/macproefifirmwareupdate13.html
. You may not be able
to boot up your Mac Pro if you fail to upgrade your EFI.