CalDigit RAID Card User Manual
Page 37
37
A. MacPro
1.6
Remove PCI-Express card(s)
Disconnect and remove all PCI-Express card(s) except for your graphics
card, lift the latch on the card connector, and pull the card out of the slot.
Note each cards slot position in order to put them back in the same order
when you finish the installation.
1.7
Remove the CPU cover
Depending on the model of your MacPro, please refer to the appropriate
instructions:
(a)
(4 Core MacPro) Remove the memory cards and the two long screws
from the back of the DIMM cage and the two short screws on the
bottom front edge of the DIMM cage. Move the DIMM cae towards the
back panel of the computer and widen the gap between the DIMM
cage and the CPU cover. Remove the CPU cover.
Latch
Graphics card
Screwdriver
Long screws(2)