CalDigit S2VR Duo Quick Installation - Manual (Page 2)

7. Install S2VR Manager:
1. Double CLICK the application on the
provided CD, CalDigit S2VR v1.0.1.pkg.
2. Introduction Screen, CLICK Continue .
3. Select OS hard drive as the Destination.
4. Installation Successful, CLICK
Close .
5. Directory: OS drive > Applications > Utilities
> CalDigit S2VR > S2VR Manager
6. Drag S2VR to the Launcher.
8. Configuring S2VR Manager:
•
S2VR Manager limits configuration access with
a password prompt. (Default:
admin )
• Go to “Management Tab” setup password,
Voice & E-mail notification.
• New password must be 5 or more characters .
• Click the “ Enable Voice notification ” box to
active the S2VR Manager voice notification.
• Click the “ Enable Email notification ” box and
configure its settings to active S2VR Manager e-
mail notification.
9. Configuring RAID setting:
1. Click on “ Configure RAID ”.
2. Select and click “ Create New RAID ”.
Click IGNORE on the Disk Insertion msg.
3. Go to OS Disk Utility, select S2VR HD and
create Partition or RAID
• CONGRATULATIONS!
Your S2VR HD is ready to use! Thank you for your
purchase. Please visit us at
www.caldigit.com for
updated drivers and information on new CalDigit
products.