Log list search/alarm, motion search – CCTV Camera Pros iDVR-E Series Video Surveillance Recorders Product Manual User Manual
Page 60
59 DIGITAL VIDEO RECORDER
2. Log List Search/Alarm, Motion Search
The logs can be used to search and review directly to a point in time of the recorded data.
Alarm, motion, video loss and system related logs can be searched and played back directly
from the time of the incident.
１
.
To start Event Search, press
[Log] button on IR Remote, then Log List Menu
pops up, as shown below.
MENU TAP
CONDITION
ALL
y
It has a list of all the events since the initial power on procedure of DVR
SYSTEM
y
It shows All Event except for Alarm, Motion, and Video Loss.
NETWORK
y
It shows NETWORK List.
ALARM
y
It shows All Alarm List.
MOTION
y
It shows Motion List.
VIDEO LOSS
y
It shows Video Loss List.
2. Use Up/Down buttons [TS] to desired “Time” to playback. Use Left/Right buttons
[WX] to move NEXT page.
3. Press [ENTER] button to start playback.
<Note>
Log list is saved on HDD.
<Note>
To save log output, please connect USB memory stick into USB port on front. Then
press Display button on each category to backup Log data. USB Icon will be flashed as
Blue.