Bosch Dual-Fuel Slide-In Range - Manual (Page 10)

Installation
English 8
The gas supply line and electrical outlet must be located in the shaded space as
shown in Figure 4: Gas Supply Line and Electrical Outlet Placement.
If not already present, install gas shut off valve in an easily accessible location.
Make sure all users know where and how to shut off the gas supply to the range.
Important note for LP users
The range is shipped from the factory for use with natural gas. For use with
propane (LP) gas, your range must first be converted using the LP conversion kit.
Cabinet Requirements This unit is designed for installation near adjacent walls and projecting surfaces
constructed of combustible materials. Prepare the countertop and cabinets as
shown in Figure 5: Cutout Requirements - Typical Installation.
Allow a minimum of 30 inches between cabinets where range is to be installed.
Figure 4: Gas Supply Line and Electrical Outlet Placement
Note:
The installer should inform the consumer of the location of the gas
shutoff valve.
7 1/2"
(190.5 mm)
13 1/8 "
(333 mm)
4"
(101.6 mm)
3 7/8"
(98 mm)
4 1/2"
114.3 mm
3 1/2"
88.9 mm
30"
(762 mm)
4 1/2"
114.3 mm
Figure 5: Cutout Requirements - Typical Installation
23 1/16"
(585.4 mm)
30" (762 mm)