BT DF60 - Manual (Page 22)

Using the answering
machine
19
• Press the NO button to change between OFF
and ON.
• Press the YES button to confirm your
option, display shows:
TAD FUNCTION .
• Press the STOP/CLEAR button to return to
standby mode.
To limit incoming message recording time
Your DF60 has a total recording time of 10
minutes (including your outgoing message and
memos). The amount of recording time
allowed for each incoming message is pre-set
to 30 seconds. This time limit can be changed
or switched off completely.
To change the recording time limit
• Press the TAD button then press the ᮤᮤ
button.
• Press the YES button until the display
shows:
ICM TIME OUT: ON?
• Press the YES button.
• Display shows: RECORD TIME: 30s?
• Press the NO button to display the available
options:
20 - 70s.
• Press the YES button to select your option,
display shows:
TAD FUNCTION .
• Press the STOP/CLEAR button to return to
standby mode.
To prevent incoming messages being cut short you
may wish to inform a caller via your outgoing
message of the amount of time they have to speak.
• Press the ᮣᮣ button to skip to the next
message.
• Press the ᮤᮤ button once to return to the
beginning of the message being played, or
twice in quick succession to skip to the
previous message.
To erase a message
To erase a message press the DEL/REC
button while the message to be deleted is
being played back. Playback is halted and
display shows:
MESSAGE DELETE? .
• Press the YES button to confirm, or press
the NO button to resume playback. If you
press the YES button, playback resumes
with the next message.
To automatically erase messages
You can set your DF60 to automatically delete a
message once you have listened to it.
• Press the TAD button, then the ᮤᮤ button,
display shows: REMOTE TAD ON or OFF
• Press the YES button until the display
shows:
AUTO DELETE: OFF?
In this mode messages can be played back once
only, they will then be permanently erased.
To ensure you have the maximum amount of
memory available for new messages, old messages
should be deleted as soon as possible.