Barco GRAPHICS 1208S R9000893 User Manual
Page 9
Location and Functions of Control
2-2
5975847 BARCOGRAPHICS 1208S 220197
b. RCU control panel terminology
This remote control includes a battery powered infrared (IR) transmit-
ter that allows the user to control the projector remotely.
This remote control is used for source selection, control, adaptation
and set-up. It includes automatic storing of :
- picture controls (Brightness, Sharpness,....)
- picture geometry adjustments
- convergence adjustments
Other functions of the remote control are:
- switching between standby and operational modes
- switching to "pause" (blanked picture, full power for immediate
restarting)
- direct access to all connected sources
- variable adjustment speed : when pushing continuously on the
control stick or the picture keys, the adjustment will be executed in
an accelerated fashion.
stand-by
sharpness
pause/park
tint
color
brightness
contrast
Back light key
: when activated, all keys will be lit up and
visible in the dark.
ADJ.
: adjust key, to enter or exit the adjustment mode.
Address key
(recessed key), to enter the address of the
projector (between 0 and 9). Press the address key,
followed by pressing one digit button between 0 and 9.
STBY
: stand by button :
- to initiate remote power up operation
- to stop projection without main power off.
Pause
:to blank the image, press PAUSE. The image
disappears but full power is retained for immediate restart-
ing.
Digit buttons
: direct input selection.
Picture controls
: use these buttons to obtain the desired
level (see also 'Controlling') for each picture function.
TEXT
: when adjusting one of the image controls during a
meeting, the displayed bar scale can be removed by press-
ing 'TEXT' key first. To re-display the bar scale on the
screen, press 'TEXT' key again. 'TEXT' key is only active in
operational mode. When 'TEXT' is off, no warning message
will be displayed.
1
2
3
4
5
6
7
8
-
+
-
+
-
+
-
+
-
+
0
9
7
8
6
5
4
3
2
1
ENTER
11
10
9
7
1
2
3
4
5
6
12
32c
PAUSE
8
TEXT
EXIT
ADJ
STBY
SHARPNESS
TINT
COLOR
BRIGHTNESS
CONTRAST
ENTER
: to start up the adjustment mode or to confirm an
adjustment or selection in the adjustment mode.
EXIT
: to leave the adjustment mode or to scroll upwards
when in the adjustment mode.
9
10
Control stick key
: to make menu selections when in the
adjustment mode. Also allows to increment or decrement an
adjustment in the adjustment mode.
control stick forward = up arrow in the menus
control stick backward = down arrow in the menus
control stick to the right = arrow to the right on the menus
control stick to the left = arrow to the left on the menus
RC operating indication
: lights up when a button on the
remote control is pressed. (This is a visual indicator to check
the operation of the remote control)
11
12