COATS ProRide Wheel Balancer - Manual (Page 8)

4 • Important: Always read and follow instructions.
Specifi cations
Wheel Diameter Range
10 - 30 inches (264 - 762 mm)
Wheel Width Range
2 - 19 inches (51 - 483 mm)
Maximum Outside Tire Diameter
Up to 42 inches (1067 mm)
Maximum Tire/Wheel Weight
160 pounds (73 Kg)
Mounting Shaft Diameter
40 mm
Resolution (Round Off Mode)
0.25 ounce, position 1.40 degrees
Resolution (Non-Round Off Mode)
0.01 ounce, position 1.40 degrees
Balancing Display Increments
0.25 or 0.01 ounces
Electrical Requirements
115V, 1 Ph, 50/60 Hz, 15A
NEMA L5-15P
(use grounding type plug)
Air Source Requirement (PL Version Only)
115-145 PSI (8-10 Bar)
(air line water separator required)
Footprint
Width: 44.5 inches (1130 mm)
Depth: 48.5 inches (1230 mm)
Height: 65.5 inches (1664 mm)
Shipping Weight
275 pounds (125 Kg)
(without accessories)
Features
• 3-D Auto Data Entry
• Simple, Interactive User Interface
• Auto Hood Start
• Static-On-Screen™ Display
• Direct Tape-A-Weight
® Application
• Pneumatic Mounting (Option)
• Radial Runout Measurement
• Lateral Runout Measurement (Option)
• Static, Dynamic And Multiple Tape-A-Weight
®
• Laser Guided Operation™