Warning caution warning – COATS 9500 Electro-Hydraulic Tire Changer User Manual
Page 17
COATS 9500 Tire Changer • 13
3. Rotate the chuck clockwise. Normally less than
1/4 of a revolution is sufficient to mount the first bead
(fig.34).
Fig.34
4. Re-attach the mounting clamp to the rim flange
with the valve forward of the mounting clamp (fig.35).
Fig.35
5. Rotate the chuck clockwise until the tire is com-
pletely mounted.
Ensure that outer bead descends into the drop center
when the clamp is opposite to the mount/demount
tool (fig.36).
Fig.36
Never use hand pressure to hold the tire
onto the rim.
Stop the chuck before one complete turn is
made to avoid serious damage to the
mounting clamp and to the rim.
Do not inflate the tire on the machine. This
machine is not an inflation device.
For inflation place the wheel in an approved
inflation restraint device. Refer to OSHA
standard number 1910.177.
WARNING
CAUTION
WARNING