COATS APX Tire Changer Series Unloading Procedures - Manual (Page 3)

COATS Unloading Instructions • 3
APX80 Unload Instruction
1. Remove lag bolts holding chassis to pallet.
2. Jack up rear of machine; install axle and wheels as
shown.
3. Remove ramp planks and position as shown.
4. Jack up front of machine and install axle and
wheels as shown.
5. Slowly push machine forward to position offload
bracket over jack.
6. Jack up front of machine and slowly move machine
off pallet.
7. Locate machine in shop at proper location and
remove wheels and temporary off-load bracket.
2
3
4
Offload
Bracket
5
6
"X"
Offload
Bracket
Remove Axles, Wheels &
Offload Bracket After
Locating In Final Position
DO NOT Fork Machine
Here: Transmission
Damages May Occur
Secure ramp planks
in position with screw
as shown.
APX80