COATS Leverless Bead Lifter Qualification Test - Manual

Leverless Power Duckhead Bead Lifter
Qualifying Test For Machine Compatibility
1. Push down on mount/demount head while pulling up on table top. Record distance -
top of clamp to bottom of mount/demount head.
2. Now, pull up on mount/demount head while pushing down on table top. Record
distance - top of clamp to bottom of mount/demount head.
3. Subtract step 1 distance from step 2 distance. If distance is greater than 3/8-inch then
machine is not compatible.
Note: If the machine is not compatible, please contact COATS® at 1-800-688-9240 for
the Certified Service Partner nearest you.