Comelit MT 6101WM-6101BM - Manual (Page 54)

ADVANCED
54
DELETING / MODIFYING AN INTERCOM
GROUP
To delete or modify an intercom group call, follow the
instructions on page 129.
ADDRESSES MENU DESCRIPTION
Simplebus code Simplebus code
Monitor
1
2
Thu 21/06/12 - 16:07 0W
Multiple address Multiple address
Intercom add.
3
4
1 Menu for setting the bracket code.
2 Menu for setting a monitor as main / secondary.
SETTING THE BRACKET CODE
Number
C
Thu 05/09/09 - 16:07 0W
Access the menu Setup > Advanced > Addresses >
Simplebus code. Enter the bracket code and press the
icon to confi rm.
Each bracket in the system is identifi ed by its own code;
this code should be a number between 1 and 240.
If the SD card is not inserted, the following message will
appear:
C
SD card error parameter saved in flash
Thu 05/09/09 - 16:07 0W