Comelit MT 6101WM-6101BM - Manual (Page 56)

ADVANCED
56
CALIBRATING THE TOUCH-SCREEN
If the touch-screen does not respond correctly to touch
commands, it can be calibrated.
Access the menu Setup > Advanced > Calibrate touch-
screen.
Language
Set date and time
Conditional commands
Reset configuration
B
B
Reset configuration
B
CONFIRM CALIBRATION
YES NO
Thu 05/09/09 - 16:07 0W
Confi rm by pressing the YES icon.
To calibrate the touch-screen, simply press and hold
the cross which appears in 3 different positions for 2
seconds.
Hold down for 2 seconds
SET INPUT
2 different functions can be assigned to the CFP-CFP
input on the bracket terminal board:
• Floor door call (CFP)
• Alarm function (a Simplebus alarm signal is sent to the
switchboard).
Access the menu Setup > Advanced > Set input.
CFP function CFP function
Alarm function
Thu 21/06/12 - 16:07 0W
Select the function by pressing the icon to the right of it.